Secrets of an audio device, or How to connect speakers to a TV
Sometimes there are very funny situations. For example, a home theater purchased for savings does not want to reveal the secret of its connection. Family council in its entirety for two hours in a row is in a thoughtful state: how to connect to the TV speakers? Despite the fact that all the cords are connected to where strictly in accordance with the instruction, there are still three unused "tulips", and the same number of so-called "bells" has already settled in the free nests of TV. Nevertheless, the sound coming from the speakers did not at all reflect the "bulk quality" claimed by the manufacturer.
How to connect to the TV speakers: a simple solution to the urgent issue
First of all, pay attention to the followingtime: how many audio outputs are in your TV device? Typically, these jacks are labeled with the notation: "Audio IN / OUT" or "Audio R / L". Depending on the modification of the television receiver, the device can be equipped with a SCART connector, optical or coaxial output. All this depends, first of all, on the novelty of your blue screen. Optimal option can be considered a conventional analog audio output ("tulips"), which is equipped with almost all modern TVs. With their help, you can connect speakers to your TV. Again, it should be understood that the output to the speakers is carried out by means of the device jacks, which have the designation "Audio OUT".
Sound Quality and Power
Undoubtedly, a wide range of sound rangeyou do not achieve a two-channel type connection, that is, when you use two speakers connected through "tulips". To hear the bulk of the video, you need a receiver or a multichannel amplifier. It is this device that allows you to give the moment of film adaptation the saturation and realism effect. And all thanks to the split sound channels and loud vocals of the subwoofer. To do this, just connect the speakers 51 to the TV and properly place the speakers, since the positioning of the sound devices depends on the quality of perception.
Ways to connect
- Option one: through a conventional RCA cable or SCART-cord connect the audio amplifier and TV-receiver. Observe the polarity of the outputs and do not confuse "IN" with "OUT".
- The second option is to use the "OPTICAL OUT" or "COAXIAL OUT" connector on the TV and the same name with the "IN" end on the home theater receiver or stereo system.
- The third method allows you to connect computerspeakers to the TV. To do this, plug the headphones connector, usually located on the front panel of the TV, to connect the plug from the speakers, and you can enjoy stereo sound.
- Sometimes the fourth option is quite appropriate,especially when you consider that the old music center is practically not used. The miniJack-2RCA cord will be the perfect medium for sound effects. Use the "AUX IN" connector of your CD-DVD processor to connect the TV "Audio OUT" output, using two "R / L" channels. Usually the music centers are equipped with a built-in equalizer, so the sound can be output.
Impeccable quality, or How to make the sound come alive
Let's focus on the option whenyou need a clean sound of notes and a pleasant ear for the timbre of speech. Only digital sound can be worthy of being called comprehensive and all-pervasive. So, the question "how to connect to a television speaker" should, first of all, imply a quality solution. Agree, it is much more comfortable to watch a movie with surround sound. Therefore, only the use of modern technologies allows us to truly enjoy the perception of the whole gamut of sound from our hearing aids.
Carrying out any of the fundamentally different typesconnection, it should always be remembered that such a phenomenon as statistical stress can become the culprit of the failure of your electronics. In order to avoid such consequences, make the connection only with the equipment turned off. Now you know how to connect the speakers to the TV, which you need to know. It is worth noting that not all known methods have been considered in this article. But still the main options are taken into account, so you should not have any difficulty with "extracting" sound from the TV and its transfer to other devices.